Epson C82332 - Manual (Page 26)

Chapter 2
Installing on Novell NetWare
The Ethernet Card can function as a print server or remote
printer running under Novell NetWare. It also has an automatic
print server/remote printer mode that allows it to switch modes
depending on network conditions. The following sections
describe how to configure the interface card to operate in each
of these modes.
Ethernet Card Configuration Software
The Ethernet Card comes with EPSON Net! for NetWare,
EPSON’S proprietary network printer management utility
program. The disk includes a Windows-based version and a
DOS version of this easy-to-use, menu-driven program.
Use the appropriate version to set up your card as a print server
or a remote printer. The default setting is print server mode. You
must use the EPSON Net! network printer management software
to add or delete queues, change port configurations, rename the
print server, configure the interface to service queues on other
file servers, and other tasks.
Installing on Novell NetWare 2-1