Epson C82332 - Manual (Page 37)

Changing the configuration in print server mode
In print server mode, you can use the EPSON Net! utility to do the
following:
Rename print server
Enter password
Set queue polling time
Before editing the Ethernet Card configuration with EPSON Net!,
you must first log on to the network with supervisor privileges.
Renaming the print server
Always use EPSON Net! to rename the printer on the master file
server. Never use PCONSOLE to perform this operation.
1. Type the new print server name into the Print Server name box.
You can enter up to 32 characters. The following characters are
I + = [ ] ” and space. A period (.) is
allowed if it is not the first character.
2. Click Save.
Note:
If the first part of the new printer name is the same as the product name,
the last four characters of the the hexadecimal serial number will affix
themselves automatically to the end of the new name.
2-12 Installing on Novell NetWare