Epson C82332 - Manual (Page 27)

Before setting up
First decide whether you want to use the interface card as a
dedicated print server or remote printer, or in Auto
PrintServer/Remote mode.
Install the Ethernet Card and connect it to the network
following the instructions in Chapter 1. The card must be
connected to the network and the host printer must be turned
on before setting up.
Installing the utility software
Follow these steps to install the EPSON Net! utility software.
for Windows:
1.
2.
3.
4.
5.
6.
Make sure Windows is running and the Main window is open.
Insert the EPSON Net!@ for NetWare’ disk in drive A (or B).
Choose Run from the File menu
Type a:windows/install (or b:windows/install) and click OK.
Follow the instructions on the screen.
After installation is completed, Epson Net!(nu) appears in the
Epson Net! group.
2-2 Installing on Novell NetWare