Solving scanning problems – Epson Workforce ES-60W Wireless Portable Document Scanner User Manual

Page 81

Light status

Condition/solution

The error status light shows
three horizontal lines and the

Wi-Fi and

Wi-Fi AP

lights flash simultaneously.

Epson ScanSmart did not launch after pressing the scanner's

start

button while connected over a network.

• Check the Wi-Fi connection. Try turning the wireless router off and on

again.

• Make sure the correct scanner is selected in Epson ScanSmart.

• Make sure another computer is not connected to the scanner using a

USB cable. A USB connection takes priority over a Wi-Fi connection.
If another computer is connected by USB, disconnect it.

• If you are using a Mac computer, make sure you select the network

that has priority on it.

Parent topic:

Solving Problems

Related references

Original Jams in Scanner
Where to Get Help

Related topics

Scanning
Wi-Fi Networking

Solving Scanning Problems

Check these solutions if you have problems scanning with your product.