Setting up crestron roomview support – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual

Page 73

Controlling a Networked Projector Using Crestron RoomView

Parent topic:

Setting Up Crestron RoomView Support

To set up your projector for monitoring and control using a Crestron RoomView system, make sure your
computer and projector are connected to the network. If you are connecting wirelessly, set up the
projector using the Advanced network connection mode.

Note:

If you want to use the Crestron RoomView system when the projector is turned off, you need to

adjust the

Standby Mode

setting in the ECO menu.

Press the

Menu

button.

Select the

Network

menu and press

Enter

Select

Network Configuration

and press

Enter

Select the

Others

menu and press

Enter

Set the

Crestron RoomView

setting to

to allow the projector to be detected.

Note:

Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the

EasyMP Monitor software.