beautypg.com

Solutions to problems with the remote control – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual

Page 190

background image

190

• If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of

inactivity. Press the power button to wake the projector and adjust the

Sleep Mode Timer

setting to

change the sleep interval.

• If the projector's lamp shuts off and the power and Temp lights are red, the projector has overheated

and shut off. Check the solutions for this light status.

• If the power button on the remote control does not turn on the projector, check its batteries and make

sure the

Remote Receiver

setting is turned on in the projector's menu, if available.

• The power cord may be defective. Disconnect the cord and contact Epson.

Parent topic:

Solving Projector or Remote Control Operation Problems

Related references

Projector Light Status
Projector Feature Settings - Settings Menu

Related tasks

Unlocking the Projector's Buttons

Solutions to Problems with the Remote Control

If the projector does not respond to remote control commands, try the following solutions:

• Check that the remote control batteries are installed correctly and have power. If necessary, replace

the batteries.

• Make sure you are operating the remote control within the reception angle and range of the projector.

• Make sure the projector is not warming up or shutting down.

• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release

the button to wake the remote control up.

• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the

projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.

• If available, turn off one of the remote receivers in the projector's menu system, or check if all the

remote receivers were turned off.

• If you assigned an ID number to the remote control to operate multiple projectors, you may need to

check or change the ID setting (feature not available with all projectors).

• If you lose the remote control, you can purchase another from an authorized Epson reseller.

Parent topic:

Solving Projector or Remote Control Operation Problems