Setting the remote control id – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual

Page 112

112

Press the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press

Enter

Repeat these steps for all the other projectors you want to operate from one remote control.

Note:

If you don't know the projector's ID, aim the remote control at the projector and press the

button

to temporarily display the projector's ID on the screen.

Parent topic:

Using Multiple Projectors (DuoLink)

Setting the Remote Control ID

The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to
set the remote control to operate only a particular projector, you need to set the remote control's ID to
match the projector's ID.

Note:

You must set the remote control ID to match the projector ID each time you turn on the projector

you have set it to control.

Turn on the projector you want the remote control to operate with exclusively.

Make sure you know the projector's ID number as set in the Extended menu

Projector ID

setting.

Note:

If you have forgotten the projector's ID, aim the remote control at the projector and press the

button to temporarily display the projector's ID on the screen. If you turn off the

Projector ID

setting, the remote control will operate the projector regardless of the ID selected on the remote.

Aim the remote control at that projector.

Hold down the

button on the remote control while you press the numeric button that matches the

projector's ID. Then release the buttons.

Press the

button on the remote control to check if the ID-setting process worked.

You see a message displayed by the projector.

• If the remote control is listed as

, the remote control ID is set to operate only the listed projector.

• If the remote control is listed as

Off

, the remote control ID is not set properly. Repeat the steps

above to set the ID to match the projector you want to control.

Parent topic:

Using Multiple Projectors (DuoLink)