Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector - Manual (Page 38)

38
3. Connect the other end of the cable to the projector's HDMI 1/MHL port.
Note: The projector converts the digital audio signal sent from your video source into a mono analog
signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
Parent topic: Connecting to Video Sources
Connecting to a Component Video Source
If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled
Y , Pb , Pr or Y , Cb , Cr . If you are using an adapter, connect these connectors
to your component video cable.