Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector - Manual (Page 180)

180
Power light Status light Lamp light Temp light Status and solution
Off Flashing blue Orange Off Lamp has a problem.
• Check to see if the lamp is burned
out, broken, or installed incorrectly.
Reseat or replace the lamp as
necessary.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode .
• If the problem persists, unplug the
projector and contact Epson for
help.
Flashing blue Varies Flashing
orange Varies Replace the lamp soon to avoid
damage. Do not continue using the
projector.
Off Flashing blue Off Flashing
orange A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Off Flashing blue Flashing
orange Flashing
orange Auto Iris error. Turn the projector off,
unplug it, and contact Epson for help.
Off Flashing blue Orange Orange Power error. Turn the projector off,
unplug it, and contact Epson for help.
Off Flashing blue Flashing
orange Off Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu