Adjusting the lamp's brightness – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual
Page 114
114
4.
Select
On
as the
Color Uniformity
setting and press
Enter
, then press
Esc
.
5.
Select
Adjustment Level
and press
Enter
.
6.
Select an adjustment level and press
Esc
.
7.
Select
Start Adjustments
and press
Enter
.
8.
Select the area you want to adjust and press
Enter
.
9.
Select
Red
,
Green
, or
Blue
and press the left arrow button to weaken the color tone or the right
arrow button to strengthen the color tone.
Note:
The adjustment screen changes each time you press
Enter
.
10. Press
Esc
to return to the area selection screen.
11. Repeat steps 8 through 10 for each area, then select
All
to adjust the entire screen.
12. Press
Esc
to exit the menus.
Parent topic:
Using Multiple Projectors (DuoLink)
Adjusting the Lamp's Brightness
When projecting with multiple projectors, you must adjust the brightness setting so that all projectors are
as bright as the darkest lamp. (Even after adjusting the brightness levels, the brightness of each lamp
may not match exactly.)
1.
Turn on all the projectors and display the same image.
2.
Press the
Menu
button.
3.
Select the
ECO
menu and press
Enter
.
4.
Select
Normal
for the
Power Consumption
setting and press
Esc
.