Setting the projector id – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual
Page 111
111
Adjusting the Lamp's Brightness
Matching the Image Colors
Adjusting RGBCMY
Parent topic:
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
Note:
In some cases, the brightness and color tone from different projectors may not match completely
even after color correction. If the brightness and color tone differences become more noticeable over
time, repeat the adjustments.
You can also match the colors displayed by any projectors you plan to use near each other.
Parent topic:
Using Multiple Projectors (DuoLink)
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1.
Press the
Menu
button.
2.
Select the
Extended
menu and press
Enter
.
3.
Select the
Multi-Projection
setting and press
Enter
.
4.
Select
Projector ID
and press
Enter
.