Solutions when the image is fuzzy or blurry – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual

Page 187

187

Supported Video Display Formats

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Clean the projection window.

Note:

To avoid condensation on the lens after bringing the projector in from a cold environment, let the

projector warm up to room temperature before using it.

• Position the projector close enough to the screen, and directly in front of it.

• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.

• Adjust the

Sharpness

setting to improve image quality.

• If you are projecting from a computer using a VGA cable, press the

Auto

button on the remote control

to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a
uniformly patterned image on the screen and manually adjust the

Tracking

and

Sync

settings.

• If you are projecting from a computer, use a lower resolution.

• Turn off any keystone correction, and disable the

Quick Corner

and

Arc Correction

settings.

Parent topic:

Solving Image or Sound Problems

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

• Press the

Color Mode

button on the remote control to try different color modes for the image and

environment.

• Check your video source settings.

• Adjust the available settings on the Image menu for the current input source, such as

Brightness

Contrast

Tint

Color Temp.

, and/or

Color Saturation

• Make sure you selected the correct

Input Signal

Video Signal

setting on the Signal menu, if

available for your image source.