Connecting to an external computer monitor, Connecting to external speakers – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual
Page 41
41
Parent topic:
Connecting to an External Computer Monitor
If you connected a computer to the projector's
Computer
port, you can also connect an external monitor
to the projector. This lets you see your presentation on the external monitor even when the projected
image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Communication On
as the
Standby Mode
setting and
Always On
as the
A/V Output
setting in the
projector's menu system.
Note:
Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1.
Make sure your computer is connected to the projector's
Computer
port. If there are two computer
ports, make sure you use the
Computer1
port.
2.
Connect the external monitor's cable to your projector's
Monitor Out/Computer 2
port.
Note:
You may need to change the
Monitor Out Port
setting in the projector's Extended menu and
restart the computer.
Parent topic:
Connecting to External Speakers
To enhance the sound from your presentation, you can connect the projector to external self-powered
speakers. You can control the volume using the projector's remote control.