Connecting a microphone – Epson PowerLite 685W 3500-Lumen WXGA Ultra-Short Throw 3LCD Projector User Manual
Page 42
42
You can also connect the projector to an amplifier with speakers.
If you want to output audio from the external speakers when the projector is turned off, you need to
select
Communication On
as the
Standby Mode
setting and
Always On
as the
A/V Output
setting in
the projector's menu system.
Note:
The projector's built-in speaker system is disabled when you connect external speakers.
1.
Make sure your computer or video source is connected to the projector with both audio and video
cables as necessary.
2.
Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-
jack cable, or another type of cable or adapter.
3.
Connect one end of the cable to your external speakers as necessary.
4.
Connect the stereo mini-jack end of the cable to your projector's
Audio Out
port.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Connecting a Microphone
You can connect a microphone to the projector's
Mic
port to provide audio support during presentations.
Note:
If you want to output audio from the microphone when the projector is turned off, you need to
select
Communication On
as the
Standby Mode
setting and
Always On
as the
A/V Output
setting in
the projector's menu system.