Solving scanning problems – Epson WorkForce WF-2930 Wireless All-in-One Color Inkjet Printer User Manual

Page 285

285

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

• The ink cartridges may be old or low on ink, and you may need to replace them.

• After you print, the colors in your printout need time to set as the ink dries. During this time, the colors

may look different than you expect. To speed up drying time, do not stack your printouts on top of each
other.

• Your printed colors can never exactly match your on-screen colors. However, you can use a color

management system to get as close as possible. Try using the color management options in your
printer software.

• Try changing the

Scene Correction

setting to something other than

Automatic

• If you are using a Mac, select

ColorSync

from the

Color Matching

menu of the driver.

• For best results, use genuine Epson paper.

• Remove any dust or dirt on the originals and clean the scanner glass.

• Do not press with too much force on the original or the document cover.

• Colors may differ if you are viewing the image on a computer or device with a high-resolution display.

Make sure to avoid direct sunlight when confirming the image on the display.

Parent topic:

Solving Print Quality Problems

Related concepts

Print Head Nozzle Check
Print Head Cleaning

Related references

Compatible Epson Papers

Solving Scanning Problems

Check these solutions if you have problems scanning with your product.