Power cleaning, Power cleaning using the product control panel – Epson WorkForce WF-2930 Wireless All-in-One Color Inkjet Printer User Manual

Page 229

229

• If there are gaps or the pattern is faint, click

Clean

to clean the print head again.

• If almost the entire pattern is missing, click

Finish

and perform a Power Cleaning.

If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then check the print head nozzles and try cleaning the print head again, if necessary.
If quality still does not improve, run a Power Cleaning.

Parent topic:

Print Head Cleaning

Power Cleaning

If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head
several times, you can run a Power Cleaning.

If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12
hours before running another Power Cleaning.

Note:

Power Cleaning consumes more ink than Print Head Cleaning.

Power Cleaning Using the Product Control Panel
Power Cleaning Using a Computer Utility

Parent topic:

Print Head Maintenance

Power Cleaning Using the Product Control Panel

You can run a Power Cleaning using the control panel on your product.

Note:

After a Power Cleaning, you must turn off the product and wait at least 12 hours before running

another Power Cleaning.

Press the

home button, if necessary.

Select

Maintenance

Power Cleaning

Follow the instructions on the LCD screen to run the Power Cleaning.

A confirmation screen is displayed when Power Cleaning is complete.

When the Power Cleaning is finished, run a nozzle check.