Epson WorkForce WF-2930 Wireless All-in-One Color Inkjet Printer User Manual

Page 282

282

• Avoid handling printouts on glossy paper right after printing to allow the ink to set.

• Turn off any high speed settings in your product software.

• If you printed on the wrong side of photo paper, clean the paper path.

• If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily

saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first.
Adjust the density and/or ink drying time settings.

• Lower the copy density setting on the product control panel.

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

• Align the print head. If print quality does not improve, disable the bidirectional setting.

• Clean the paper path.

• Do not press too hard on the original or the document cover when you are scanning originals on the

scanner glass.

• Clean the scanner glass.

• If you are copying from the ADF, place your originals on the scanner glass instead.

• Clean the ADF.

• Clean the originals.

Note:

Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that

extends beyond the base of the product in all directions.

Parent topic:

Solving Print Quality Problems

Related concepts

Print Head Nozzle Check
Print Head Cleaning

Related references

Paper or Media Type Settings - Printing Software