Fax sending options – Epson WorkForce WF-2930 Wireless All-in-One Color Inkjet Printer User Manual

Page 182

182

Note:

If direct dialing has been restricted, you can only select the number from the contact list or

fax history. If necessary, enter an outside line access code (such as 9) at the beginning of the fax
number. If the access code has been set up in the

Line Type

setting, enter the

pound sign

instead of the code. If your fax number requires a brief pause, press the down arrow button to
insert a pause symbol (–).

•

Select from the contact list

: Press the up arrow button to display the contact list. Press the

button to select or deselect each contact. Press the

back button when you are finished.

•

Select from the sent fax history

: Press the down arrow button to display the sent fax history.

Select a recipient from the list.

Note:

To delete entered recipients, press the right arrow button, select the recipient you want to

delete, and press the

back button when you are finished.

If you need to change any fax settings, press the

button to select

Menu

and change any

necessary settings.

Press the

start button to send the fax.

Note:

To cancel faxing, press the

cancel button. If the fax number is busy or there is a problem,

the product automatically redials after one minute. It takes longer to send a fax in color because the
product scans and sends simultaneously. You cannot use other features while the product is
sending a color fax.

After scanning your originals, your product dials the number and sends the fax.

Parent topic:

Sending Faxes from the Product Control Panel

Related references

Fax Sending Options

Related tasks

Selecting the Line Type

Fax Sending Options

Before sending a fax, you can press the

button to select

Menu

and change any of these options.

Scan Settings