Selecting the line type – Epson WorkForce WF-2930 Wireless All-in-One Color Inkjet Printer User Manual
Page 163
163
8.
On the Receive Mode Setting screen, do one of the following:
• If you have connected an external telephone or answering machine to the product, press the
OK
button to select
Yes
and go to the next step.
• If you did not connect an external telephone or answering machine, press the
cancel button to
select
No
and go to step 10. (Receive Mode is automatically set to
Auto
; otherwise you cannot
receive faxes.)
9.
On the next Receive Mode Setting screen, press the
OK
button to select
Yes
to receive faxes
automatically or press the
cancel button to select
No
to receive faxes manually.
Note:
If you connect an external answering machine and select to receive faxes automatically, make
sure the
Rings to Answer
setting is correct. If you select to receive faxes manually, you need to
answer every call and operate the product’s control panel or your phone to receive faxes.
10. On the Confirmation screen, confirm the displayed settings and press the
OK
button to select
Proceed
, or press the
back button to change the settings.
11. On the Check Fax Connection screen, press the
OK
button to select
Start Checking
and follow the
on-screen instructions to check the fax connection and print a report of the check result. If there are
any errors reported, try the solutions on the report and run the check again.
If the Select Line Type screen appears, select the correct line type.
If the Select Dial Tone Detection screen appears, select
Disable
. However, disabling the dial tone
detection function may drop the first digit of a fax number and send the fax to the wrong number.
Parent topic:
Related references
Entering Characters on the LCD Screen
Selecting the Line Type
If you connect the product to a PBX phone system or terminal adapter, you must change the product's
line type. PBX (Private Branch Exchange) is used in office environments where an external access code
such as “9” must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched
Telephone Network), which is a standard home phone line.
1.
Press the
home button, if necessary.
2.
Select
Settings
>
Fax Settings
>
Basic Settings
>
Line Type
>
PBX
.