Print head cleaning – Epson WorkForce WF-2930 Wireless All-in-One Color Inkjet Printer User Manual

Page 225

225

• If there are gaps or the pattern is faint, clean the print head.

• If almost the entire pattern is missing, click

Finish

and perform a Power Cleaning.

If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then run a nozzle check and try cleaning the print head again. If quality still does not
improve, run a Power Cleaning.

Parent topic:

Print Head Nozzle Check

Print Head Cleaning

If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.

Note:

You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it

when a cartridge is low. You must replace the cartridge first.

Cleaning the Print Head Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility

Parent topic:

Print Head Maintenance

Related concepts

Purchase Epson Ink Cartridges and Maintenance Box

Cleaning the Print Head Using the Product Control Panel

You can clean the print head using the control panel on your product.

Make sure there are no errors on the LCD screen.

Load a few sheets of plain paper in the product.

Press the

home button, if necessary.

Select

Maintenance

Head Cleaning

Press the

start button to start cleaning the print head.

When the cleaning cycle is finished, you see a message on the screen.