Sony FE 2x Teleconverter - Manual (Page 63)

SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc. Made in the USA Page 63
Camera Unit Update Process
This feature will update the cards in the SilverBack V camera unit through the microSD card.
To use the Silverback V Camera Update Feature:
• First, turn off the SilverBack V camera unit
• Place the update file (.bin) onto the microSD card
• Insert the card into the SilverBack V camera unit
• Turn on the unit.
• Navigate to the camera firmware update menu.
o To navigate to the camera firmware update menu: System settings à Maintenance à
Card Update.
On the update screen, it will display the name of the card that will be updated, the update version and
the software version currently installed.
Select update to start the update process and it will show “Done” in green when the update process is
finished.
Each CPU Software update takes around 2 minutes and each FPGA Firmware update takes around 5
minutes.
SilverBack V remote camera update process
This feature allows user to update the software in the camera unit from the base unit. This is useful
when the camera is located in hard to reach places.
To use the Silverback V Remote Camera Update Feature:
• Turn off both SilverBack V camera and base unit
• Place the update file (.bin) onto the microSD card
• Insert the card into the SilverBack V base unit
• Turn on the units.