Connections: camera unit, Camera unit connectors – Sony FE 2x Teleconverter User Manual
Page 18
SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc.
Made in the USA
Page
18
CONNECTIONS: CAMERA UNIT
Camera Unit Connectors
The following section describes connections to the SilverBack V camera unit. Depending on the type of
system ordered, some of the signal types may not be available. The SilverBack V camera unit is installed
on the camera by sliding it onto the camera’s V-mount or Anton Bauer battery plate until it clicks and
locks into place.
Camera Unit System Example: SB5-C4K1-SPPJ-5CVV
4K Camera Video Connections
The 4K CAM inputs on the camera unit are highlighted in blue and are capable of accepting single-link,
dual-link, and quad-link SDI formats, supporting SD, HD, and 4K resolutions up to 4Kp60. Connect the 4K
CAM inputs of the camera unit to the camera’s 4K video outputs. Depending on the type of camera and
video resolution, up to four HD-BNC cables may be needed.
HDBNC #
Signal
4K Application
1
12G/6G/3G/1.5G with gearbox
Single Link
Dual Link
Quad Link
2
6G/3G/1.5G with gearbox
X
3
3G/1.5G with gearbox
X
4
3G/1.5G with gearbox