Sony FE 2x Teleconverter - Manual (Page 27)

SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc. Made in the USA Page 27
CONTROL PANEL: CAMERA UNIT MENUS
General Instructions
All menus in the SilverBack V camera unit control panel function similarly. MENU/ENTER displays the
Main menu.
Navigation within the menus:
• UP/DOWN arrows highlight menu options.
• MENU/ENTER toggles between or selects option.
• Select BACK and then ENTER to return to the previous menu.
• Select HOME and then ENTER to return to the main status screen.
Main Menu
The Main menu shows the setting options:
• Video Settings: Gearbox and viewfinder setup
• Audio Settings: Input, output, and intercom settings
• Data Settings: Data transmission settings
• System Settings: Timecode, fan, and maintenance settings
Video Settings
Gearbox Configuration and Operation
The gearbox in the SilverBack V camera unit takes the main camera video output and multiplexes it into
a single video stream that is sent to the base unit. The gearbox accepts single-link, dual-link, and quad-
link video inputs at SMPTE data rates ranging from 1.5G (HD) up to 12G.
The gearbox Input mode must be configured to match the type of output the camera is providing, which
will be either a single-link, dual-link, or quad-link signal. The default setting from the factory is quad 3G.