Sony FE 2x Teleconverter User Manual
Page 14
SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc.
Made in the USA
Page
14
ST & Molex Connector Systems
Systems with ST and Molex connectors provide both fiber-optic connectivity to the camera and power to
the SilverBack V camera unit. This configuration allows for custom breakout wiring and is typically used
where multiple systems are connected to a local patch panel, where they make the transition to
standard hybrid-fiber cabling. It is recommended to power off the base unit, where possible, before
connecting hybrid fiber cable to the camera unit.
Camera 1
Camera 2
The Molex connector on the SilverBack V chassis is a five-pin male Molex Mini-Fit Jr p/n 39-01-4053
(MDCON04787) or equivalent. This configuration requires Molex p/n 39-00-0041 (MDCON04799) crimp
pins. The mate for the chassis connector on a breakout cable is Molex Mini-Fit Jr p/n 39-01-4051
(MDCON04818) or equivalent. This configuration requires Molex p/n 39-00-0039 (MDCON04817) crimp
pins.
Molex Pin #
Description
Neutrik
OpticalCON DUO
Connector Pin #
Lemo
SMPTE Connector Pin
Color
1
54VDC Out +
4
Black
2
54VDC Out +
2
Red
3
Chassis Ground (Shield)
Tab
Green (Shield)
4
54VDC Out –
3
Grey
5
54VDC Out –
1
White