Sony FE 2x Teleconverter - Manual (Page 44)

SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc. Made in the USA Page 44
Audio Output Configuration
The SilverBack V base unit can output analog Line-level or AES audio on the audio DB25 connector.
To configure the base unit audio outputs for Line or AES mode, navigate to the Audio Output Settings
Menu and select either Analog or AES as desired for each camera chain. Audio outputs are treated as
stereo pairs for channels 1 and 2 and channels 3 and 4.
To configure the base unit audio outputs for Line or AES mode, navigate to the Base Unit Settings menu
and select Audio Outputs, then either Analog or AES for each camera chain. Audio outputs are treated as
stereo pairs for channels 1 and 2 and channels 3 and 4. When selecting AES for either output pair, the
physical output is taken from the odd numbered output channel on the connector.
Base Unit Menu > Settings > Audio Outputs >
The Audio output settings may also be configured from the webpage dashboard accessed from the Base
Unit.