beautypg.com

Sony FE 2x Teleconverter User Manual

Page 30

background image

SilverBack V Camera-Mountable Fiber Optic Transmission System

© 2021 MultiDyne, Inc.

Made in the USA

Page

30

Audio Input Settings

The SilverBack V camera unit can accept analog line or MIC level inputs on the two miniXLR input

connectors and/or analog Line or AES input on the high-density MDR connector. Audio input channels 1

and 2 can be taken either from the miniXLR connectors for MIC/Line applications or from the MDR

connector for Line/AES applications. Audio input channels 3 and 4 are always from the MDR connector.

Audio Inputs 1 and 2, MIC or Line Mode, miniXLR Connectors

To configure the camera unit’s inputs for audio channels 1 and 2 for MIC/Line mode, navigate to the

Audio Inputs menu, select Input 1/2 Source, then XLR-MIC/Line.

MENU > Audio Settings >Audio Inputs > Input 1/2 Source > XLR-MIC/Line

After setting the source, navigate back one level and select the MIC/Line Settings menu to configure

each input.

MENU > Audio Settings > Audio Inputs > MIC/Line Settings

From here, the settings for each individual input are made. The settings for these two inputs are

independent of each other; one may be set for MIC mode while the other is in Line mode, for example.

Navigate to the MIC/Line 1 Settings menu.

MENU > Audio Settings > Audio Inputs > MIC/Line Settings > MIC/Line 1 Settings

For Line mode, navigate to Mode and press Enter to toggle between MIC and Line modes until Line is

displayed. After selecting Line for Input 1, navigate back up a menu level to configure input 2, if desired.

When Line mode is selected, Phantom power is always turned off and Gain is fixed at 0 dB (unity).

For MIC mode, navigate to Mode and press Enter to toggle between MIC and Line modes until MIC is

displayed. After selecting MIC for input 1, the previously used Gain and Phantom settings are recalled.