beautypg.com

Sony FE 2x Teleconverter User Manual

Page 21

background image

SilverBack V Camera-Mountable Fiber Optic Transmission System

© 2021 MultiDyne, Inc.

Made in the USA

Page

21

An MDR mating connector is included with each system for constructing breakout cables. See pinouts

for more details. A pre-made breakout cable to XLR connectors is also available.

Part Number

Description

MDR-XLR-4X4AN-1M

Breakout cable, MDR26 to 4 XLR-F & 4 XLR-M

Tally and GPIO Connections

Tally and GPIO connections on the SilverBack V camera unit are provided on a high-density HD15

connector. The following table describes the available tally and GPIO signals.

Signal

Direction

Description

Pin

Red Tally

Output

Red tally relay contact. Will close to ground when

activated.

Green Tally

Output

Green tally relay contact. Will close to ground

when activated.

Generic GPI

Input

General-purpose GPI input. Connect to ground to

activate.

Generic GPO

Output

General-purpose relay contact. Will close to

ground when activated.

Viewfinder In Select

Input

Selects Viewfinder switch input source. Ground

selects return video, open selects CAM input.

Ch1 Intercom PTT

Input

Ch1 MIC enable trigger. Refer to Intercom

Operation for more details.

Ch2 Intercom PTT

Input

Ch2 MIC enable trigger. Refer to Intercom

Operation for more details.

Rec Trigger

Input

Reserved for future use.

+12VDC

Output

+12VDC/1A max.

An external tally light, as well as pre-made breakout cables, are available.

Part Number

Description

TL-SB5

SilverBack V camera-side tally light with 5-pin miniXLR connector

BO-TALLY-DB15-MXLR5

SilverBack V camera-side tally breakout cable, HD15 to 5-pin miniXLR

BO-PTT-TALLY-DB15

SilverBack V camera-side Y cable breakout supports tally and intercom

push to talk. Includes two intercom PTT switches and 5-pin miniXLR.

Serial Data Connections

The SilverBack V camera unit is equipped with two dedicated user-configurable serial data ports to

control cameras or other peripherals. Each data port can independently support RS232, RS422, LANC,

and TTL level data. These two ports are combined into a single high-density HD15 connector. See

pinouts for more details. Pre-made cables for specific camera and RCP manufacturers are available

.