Sony FE 2x Teleconverter User Manual
Page 20
SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc.
Made in the USA
Page
20
TRX
Card
Viewfinder Mode Disabled
Viewfinder Mode Enabled
BNC #
Port
Name
Port Description
Port
Name
Port Description
1
3G IN
3G-SDI video input
3G IN
3G-SDI video input
2
LOOP
Loop output of above input
3G OUT
Return video from the base unit
3
3G OUT A Return video from the base
unit
CAM IN
3G-SDI camera video input
4
3G OUT B Return video from the base
unit (copy)
VF OUT
Viewfinder switch output.
Connect to SDI input of
viewfinder monitor
2RX
Card
Viewfinder Mode Disabled
Viewfinder Mode Enabled
BNC # Port Name
Port Description
Port
Name
Port Description
1
3G OUT1 A Return video 1 from the base
unit
3G OUT1
Return video 1 from the base unit
2
3G OUT1 B Return video 1 from the base
unit (copy)
3G OUT2
Return video 2 from the base unit
3
3G OUT2 A Return video 2 from the base
unit
CAM IN
3G-SDI camera video input
4
3G OUT3 B Return video 2 from the base
unit (copy)
VF OUT
Viewfinder switch output.
Connect to SDI input of
viewfinder monitor
Ethernet Connection
The SilverBack V camera unit is equipped with a 10/100/1000 Mbps Ethernet port. Connect to the
camera or other device using Cat 5e or Cat 6 cable.
Intercom Headset Connection
The SilverBack V camera unit is equipped with an intercom headset port supporting both single- and
dual-muff intercom headsets via a 5-pin miniXLR connector. A 5-pin miniXLR-M to XLR-F adapter cable
for dual-muff headsets is included with the system. Contact MultiDyne for other adapter cable options.
Audio Connections
There are two distinct audio connection sections on the SilverBack V camera unit. The first are the two
miniXLR MIC/Line inputs adjacent to the intercom headset connector. These analog inputs are used for
applications requiring MIC level or the flexibility of switching between MIC and Line level. These inputs
are setup in the System menu. Gain is fixed at unity when set to Line mode. In MIC mode, gain is
adjustable and 48V phantom power can be enabled. Two 3-pin miniXLR-M to XLR-F adapter cables are
included with the system.
The other audio connector is a high-density 26-pin MDR connector. This provides bidirectional four-
channel analog Line/AES connectivity, mimicking the DB25 on the base unit. These inputs and outputs
are configured using the System menu as either analog Line level or AES, on a stereo-pair basis.