Sony FE 2x Teleconverter - Manual (Page 31)

SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc. Made in the USA Page 31
Navigate to Gain and press Enter to toggle through the available Gain settings. Gain is adjustable in 5dB
increments. Navigate to Phantom and press Enter to turn Phantom power on or off, as desired. After
completing the MIC settings for Input 1, navigate back up a menu level to configure Input 2, if desired.
Use the same procedure to configure Input 2 for Line or MIC mode by navigating to the MIC/Line 2
Settings menu.
MENU > Audio Settings > Audio Inputs > MIC/Line Settings > MIC/Line 2 Settings
Audio Inputs 1 and 2, Line or AES Mode, High-Density Connector
To configure the camera unit’s inputs for audio channels 1 and 2 for Line or AES mode using the high-
density connector, navigate to the Audio Inputs menu, select Input 1/2 Source, then select either DB-
Line or DB-AES, as desired. These inputs are treated as a stereo pair together and cannot be split
between analog and AES.
MENU > Audio Settings > Audio Inputs > Input 1/2 Source > DB-Line
or
MENU > Audio Settings >Audio Inputs > Input 1/2 Source > DB-AES
When selecting AES for inputs 1 and 2, the input is taken from the channel 1 input. After setting the
source, navigate back one level to configure the settings for input 3 and 4.
Audio Inputs 3 and 4, Line or AES Mode, High-Density Connector:
To configure the camera unit’s inputs for audio channels 3 and 4 for Line or AES mode using the high-
density connector, navigate to the Audio Inputs menu, select Input 3/4 Source, then select either DB-
Line or DB-AES, as desired. These inputs are treated as a stereo pair and cannot be split between analog
and AES. They may be set differently than inputs 1 and 2, however.
MENU > Audio Settings >Audio Inputs > Input 3/4 Source > DB-Line
or
MENU > Audio Settings >Audio Inputs > Input 3/4 Source > DB-AES
When selecting DB-AES for inputs 3 and 4, the input is taken from the channel 3 input.
Audio Output Settings
The SilverBack V camera unit outputs four channels of analog Line-level or AES audio on the high-density
MDR connector.