Sony FE 2x Teleconverter - Manual (Page 35)

SilverBack V Camera-Mountable Fiber Optic Transmission System
© 2021 MultiDyne, Inc. Made in the USA Page 35
System Settings, and from the System Settings menu select Timecode. On the Timecode BNC menu,
select Direction and press Enter to toggle through the available settings.
The Camera timecode settings may also be configured remotely, from the webpage dashboard accessed
from the Base Unit.
MENU > System Settings > Timecode BNC
Some cameras utilize only a single connector for timecode. In this case, please ensure the timecode port
direction on the camera is also set accordingly.
Fan Control
To change the speed of the internal fan, navigate to the Main menu, select System Settings, then Fan.
The Profile is a factory setting and should be kept at the default setting of 1. For fan speed, the choices
are Off, Low, Med, and High. It is recommended to keep the speed setting at high to ensure maximum
cooling.
MENU > System Settings > Fan Settings
• Profile: 1 to 4
• Speed: Low, Medium, High, or Off
The Camera fan settings may also be configured remotely, from the webpage dashboard accessed from
the Base Unit.