Roland SH-4d Digital Desktop Synthesizer - Manual (Page 162)

MFX Parameters
162
Enhncr -> Cho (Enhancer -> Chorus)
Parameter Value Explanation
Enh Sens 0–127 Sensitivity of the enhancer
Enh Mix 0–127 Level of the overtones generated by the enhancer
Cho
PreDly
0.0–100 [ms] Adjusts the delay time from the direct sound until the chorus sound is heard.
Cho Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
C. Rate 0.05–10.00 [Hz] Frequency of modulation
C.Rate Nt Note (P.167)
Cho Depth 0–127 Depth of modulation
Cho Bal
D100: 0W–D0:
100W Adjusts the volume balance between the sound that is sent through the chorus (W) and the
sound that is not sent through the chorus (D).
Level 0–127 Output Level
Enhncr -> Fl (Enhancer -> Flanger)
Parameter Value Explanation
Enh Sens 0–127 Sensitivity of the enhancer
Enh Mix 0–127 Level of the overtones generated by the enhancer
Flg PreDly 0.0–100 [ms] Adjusts the delay time from the direct sound until the flanger sound is heard.
Flg Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
F. Rate 0.05–10.00 [Hz] Frequency of modulation
F.Rate Nt Note (P.167)
Flg Depth 0–127 Depth of modulation
Flg Fbk
-98–+98 [%] Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.