Multitapdly (multi tap delay) – Roland SH-4d Digital Desktop Synthesizer User Manual
Page 137
MFX Parameters
137
Parameter
Value
Explanation
Dly3 Lv
0–127
Dly4 Lv
0–127
Low Gain
-15–+15 [dB]
Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB]
Amount of boost/cut for the high-frequency range
Balance
D100: 0W–D0: 100W
Volume balance between the direct sound (D) and the delay sound
(W)
Level
0–127
Output Level
MultiTapDly (Multi Tap Delay)
This effect has four delays.
Each of the Delay Time parameters can be set to a note length based on the selected tempo.
You can also set the panning and level of each delay sound.
Parameter
Value
Explanation
Dly1 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D1.Time
1–2600
Adjusts the time from the original sound until delay 1 sounds is
heard.
D1Time
Nt
(P.167)
Dly2 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D2.Time
1–2600
Adjusts the time from the original sound until delay 2 sounds is
heard.
D2Time
Nt
(P.167)
Dly3 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D3.Time
1–2600
Adjusts the time from the original sound until delay 3 sounds is
heard.
D3Time
Nt
(P.167)
Dly4 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D4.Time
1–2600
Adjusts the time from the original sound until delay 4 sounds is
heard.
D4Time
Nt
(P.167)