Roland SH-4d Digital Desktop Synthesizer - Manual (Page 142)

MFX Parameters
142
Looper
DJFX Looper
Loops a short portion of the input sound.
You can vary the playback direction and playback speed of the input sound to add turntable-type effects.
Parameter Value Explanation
Length
230–23 (not
straight)
Specifies the length of the loop.
Speed
-1.00–+1.00 Specifies the playback direction and playback speed.
- direction: Reverse playback
+ direction: Normal playback
0: Stop playback
As the value moves away from 0, the playback speed becomes faster.
Loop Sw
OFF, ON If you turn this on while the sound is heard, the sound at that point will be looped.
Turn this off to cancel the loop.
* If the effect is recalled with this ON, this parameter must be turned OFF and then turned ON
again in order to make the loop operate.
Level 0–127 Output Level