Roland SH-4d Digital Desktop Synthesizer - Manual (Page 103)

MFX Parameters
103
Parameter Value Explanation
Polarity
INVERSE, SYNCHRO Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Resonance 0–127 Amount of feedback
Feedback
-98–+98 [%] Adjusts the proportion of the phaser sound that is fed back into the effect.
Negative (-) settings will invert the phase.
S Rate
Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
S.Rate 0.10–20.00 [Hz] Rate of the step-wise change in the phaser effect
S.Rate Nt Note (P.167)
Mix 0–127 Level of the phase-shifted sound
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Level 0–127 Output Level
M StagePhsr (Multi Stage Phaser)
Extremely high settings of the phase difference produce a deep phaser effect.
Parameter Value Explanation
Mode
4-STAGE, 8-STAGE, 12-STAGE, 16-STAGE, 20-STAGE,
24-STAGE
Number of stages in the phaser
Manual
0–127 Adjusts the basic frequency from which the sound will be
modulated.
Rate Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the
rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
Rate 0.05–10.00 [Hz] Frequency of modulation
Rate Note Note (P.167)
Depth 0–127 Depth of modulation
Resonance 0–127 Amount of feedback
Mix 0–127 Level of the phase-shifted sound
Pan L64–63R Stereo location of the output sound
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Level 0–127 Output Level