Roland SH-4d Digital Desktop Synthesizer - Manual (Page 134)

MFX Parameters
134
Para
met
er
Value Explanation
High
Gain
-15–+15 [dB] Amount of boost/cut for the high-frequency range
Bala
nce
D100: 0W–D0: 100W Volume balance between the direct sound (D) and the delay sound (W)
Leve
l
0–127 Output Level
2Tap PanDly (2 Tap Pan Delay)
Parameter Value Explanation
Delay Sync OFF, ON If this is ON, the delay synchronizes with the tempo.
D. Time
(ms)
1–2600 Adjusts the time until the second delay sound is heard.
D.Time
（ Nt ）
Note (P.167)
Delay Fbk
-98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
Dly HF
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which sound fed back to the effect is
filtered out. If you don’t want to filter out any high frequencies, set
this parameter to BYPASS.
Dly1 Pan L64–63R Adjusts the stereo location of delay 1.
Dly2 Pan L64–63R Adjusts the stereo location of delay 2.
Dly1 Lv 0–127 Adjusts the volume of delay 1.
Dly2 Lv 0–127 Adjusts the volume of delay 2.
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance
D100: 0W–D0: 100W Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent through the
delay (D).
Level 0–127 Output Level