Saturator, W saturator (worm saturator) – Roland SH-4d Digital Desktop Synthesizer User Manual
Page 122
MFX Parameters
122
Saturator
This effect combines overdrive and filter.
Parameter
Value
Explanation
Pre Type
THRU, LPF, HPF, LSV, HSV Type of filter that precedes the distortion processing
THRU: No filter is applied
LPF: A filter that passes the sound below the specified frequency
HPF: A filter that passes the sound above the specified frequency
LSV: A filter that boosts/cuts the sound below the specified frequency
HSV: A filter that boosts/cuts the sound above the specified frequency
Pre Freq
20–16000 [Hz]
Frequency at which the pre-distortion filter operates
Pre Gain
-24.0–+24.0 [dB]
For the LSV/HSV types, the amount of boost/cut
Drive
0.0–48.0 [dB]
Strength of distortion
Post1 Type
THRU, LPF, HPF, LSV, HSV Type of filter 1 which follows the distortion processing
Post1Frq
20–16000 [Hz]
Frequency at which post-distortion filter 1 operates
Post1Gain
-24.0–+24.0 [dB]
For the LSV/HSV types, the amount of boost/cut
Post2 Type
THRU, LPF, HPF, LSV, HSV Type of filter 2 which follows the distortion processing
Post2Frq
20–16000 [Hz]
Frequency at which post-distortion filter 2 operates
Post2Gain
-24.0–+24.0 [dB]
For the LSV/HSV types, the amount of boost/cut
Post3 Type
THRU, LPF, HPF, BPF, PKG Type of filter 3 which follows the distortion processing
THRU: No filter is applied
LPF: A filter that passes the sound below the specified frequency
HPF: A filter that passes the sound above the specified frequency
BPF: A filter that passes only the specified frequency
PKG: A filter that boosts/cuts the specified frequency
Post3Frq
20–16000 [Hz]
Frequency at which post-distortion filter 3 operates
Post3Gain
-24.0–+24.0 [dB]
For the PKG type, the amount of boost/cut
Post3 Q
0.5–16.0
Width of the frequency range affected by the filter
Sense
-60.0–0.0 [dB]
Adjust this value so that the sound is not made louder when distortion is applied.
PostGain
-48.0 +12.0 [dB]
Gain following distortion processing
Balance
D100: 0W–D0: 100W
Volume balance between the dry sound (D) and effect sound (W)
Level
0–127
Output Level