Sony Cyber-shot RX10 III - Manual (Page 67)

settings for [ Record Setting], [ Frame Rate], [ Priority Setting], and [
REC Timing].
You can adjust the desired exposure mode by selecting MENU→
(Camera
Settings
)→[High Frame Rate].
You can set other shooting settings such as focus area, focus mode, and frame rate,
and perform zooming on the HFR setting screen.
3. Press the in the center of the control wheel.
The shooting screen will be displayed.
To change the settings, press in the center once again to switch to the HFR
setting screen.
4. Press the MOVIE (Movie) button.
The camera will automatically start recording as soon as you finish shooting.
Menu item details
Record Setting:
Selects the frame rate of the movie from [60p 50M]/[50p 50M], [30p 50M]/[25p 50M], and
[24p 50M*].
* Only when [NTSC/PAL Selector] is set to NTSC.
Frame Rate:
Selects the shooting frame rate from [240fps]/[250fps], [480fps]/[500fps], and
[960fps]/[1000fps].
Priority Setting:
Select [Quality Priority] or [Shoot Time Priority]. If you select [Shoot Time Priority], the
recordable duration is longer than in [Quality Priority] mode.
REC Timing:
Selects whether to record a set amount of time after pressing the MOVIE button ([Start
Trigger]), or to record for a set amount of time until you press the MOVIE button ([End
Trigger]).
Hint
Shortest shooting distance
The image becomes out of focus when the subject is too close, such as during macro
shooting. Shoot from the shortest shooting distance (W side: Approx. 3 cm (0.10 ft), T
side: Approx. 72 cm (0.82 ft) (from the lens)).
Timing of recording
Depending on the [ REC Timing] setting, the relationship between when you press the