The product does not work properly. [353, The product does not work properly – Sony Cyber-shot RX10 III User Manual
Page 269
[350] Troubleshooting
Troubleshooting
Others
The Clock Set screen appears when you turn on the
product.
Set the date and time again.
The internal rechargeable backup battery has discharged. Insert a charged battery, and
set aside for 24 hours or more with the power left off.
[351] Troubleshooting
Troubleshooting
Others
The number of recordable images does not decrease, or
decreases two images at a time.
This is because the compression rate and the image size after compression change
depending on the image when you shoot a JPEG image.
[352] Troubleshooting
Troubleshooting
Others
Settings are reset even though resetting operation has
not been performed.
The camera settings may be reset if the battery pack is ejected while the power is on.
When ejecting the battery pack, first turn the power off and check that the access lamp is
not illuminated before ejecting.
[353] Troubleshooting
Troubleshooting
Others
The product does not work properly.
Turn off the product. Remove the battery pack and insert it again. If the product is hot,