Sony Cyber-shot RX10 III - Manual (Page 44)

wheel. Your selection is determined when you press on the center of the control wheel.
The DISP (Display Setting) is assigned to the top side of the control wheel. You can assign
selected functions to the left/right/bottom side of the control wheel or to in the center,
and to the rotation of the control wheel.
During playback, you can display the next/previous image by pressing the right/left side of
the control wheel or by turning the control wheel.
[21] How to Use Confirming the operation method Confirming the operation method
Using the lens ring
By turning the front lens ring
(A) and rear lens ring (B), you can use the zoom and focus
functions more intuitively. You can also switch the assignment of the zoom and focus
functions to the front lens ring or the rear lens ring using [Lens Ring Setup].
Icons and function names are displayed on the screen as follows.
Ex.
: Adjust the zoom by turning the rear lens ring
(B).
: Adjust the focus by turning the front lens ring
(A), and adjust the zoom by turning the
rear lens ring
(B).
[22] How to Use Confirming the operation method Confirming the operation method
Using the control dial
By turning the control dial
(A), you can instantly change settings as needed for various