Sony Cyber-shot RX10 III - Manual (Page 181)

Finder Color Temp.
Adjusts the color temperature of the electronic viewfinder.
1. MENU
→ (Setup) → [Finder Color Temp.] → desired setting.
Menu item details
-2 to +2:
When you select “-,” the viewfinder screen changes to a warmer color, and when you select
“+,” it changes to a colder color.
[192] How to Use Changing settings Setup menu
Gamma Disp. Assist
Movies with S-Log gamma are assumed to be processed after shooting in order to make use
of the wide dynamic range. They are therefore displayed in low contrast during shooting and
may be difficult to monitor. However, using [Gamma Disp. Assist], contrast equivalent to that
of normal gamma can be reproduced. In addition, [Gamma Disp. Assist] can also be applied
when playing back movies on the camera's monitor/viewfinder.
1. MENU
→ (Setup) → [Gamma Disp. Assist].
2. Press the top/bottom of the control wheel and select the desired setting.
Menu item details
Off:
Does not apply [Gamma Disp. Assist].
Auto:
Displays movies with an
[S-Log2→709(800%)] effect when the gamma set in [Picture
Profile] is [S-Log2]. [Gamma Disp. Assist] is not applied when the gamma is set to other
than [S-Log2].
S-Log2→709(800%):
Displays movies with an S-Log2 gamma reproducing contrast equivalent to ITU709(800%).
Note
When [Gamma Disp. Assist] is set to [Auto] during playback, the picture is displayed