Sony Cyber-shot RX10 III - Manual (Page 139)

Note
Regardless of the [Audio Rec Level] settings, the limiter always operates.
[Audio Rec Level] is available only when the shooting mode is set to Movie.
The [Audio Rec Level] settings are applied for both the internal microphone and the
(Microphone) terminal input.
[128] How to Use Using shooting functions Recording movies
Audio Out Timing
You can set echo cancellation during audio monitoring and prevent undesirable deviations
between video and audio during HDMI output.
1. MENU
→
(Camera Settings
) → [Audio Out Timing] → desired setting.
Menu item details
Live:
Outputs audio without delay. Select this setting when audio deviation is a problem during
audio monitoring.
Lip Sync:
Outputs audio and video in sync. Select this setting to prevent undesirable deviations
between video and audio.
[129] How to Use Using shooting functions Recording movies
Wind Noise Reduct.
Sets whether or not to reduce wind noise during movie recording.
1. MENU
→ (Camera Settings) → [Wind Noise Reduct.] → desired setting.
Menu item details
On:
Reduces wind noise.
Off:
Does not reduce wind noise.