Sony Cyber-shot RX10 III - Manual (Page 38)

When using a mobile charger as a power source, confirm that it is fully charged before
use. Also, be careful of the remaining power on the mobile charger during use.
[14] How to Use Preparing the camera Charging the battery pack
Removing the battery pack
How to remove the battery pack
1. Make sure that the access lamp is not lit, and turn off the camera.
2. Open the battery cover.
3. Slide lock lever
(A) and remove the battery pack.
Be careful not to drop the battery pack.
[15] How to Use Preparing the camera Inserting a memory card (sold separately)
Inserting a memory card
How to insert a memory card
1. Open the memory card cover.