Sony Cyber-shot RX10 III - Manual (Page 157)

[155] How to Use Using shooting functions Setting the other functions of this product
SteadyShot (still image)
Sets whether or not to use the SteadyShot function.
1. MENU
→
(Camera Settings
) → [
SteadyShot]
→ desired setting.
Menu item details
On:
Uses [
SteadyShot].
Off:
Does not use [
SteadyShot].
We recommend that you set the camera to [Off] when using a tripod.
[156] How to Use Using shooting functions Setting the other functions of this product
Long Exposure NR (still image)
When you set the shutter speed to 1/3 second(s) or longer (long exposure shooting), noise
reduction is turned on for the duration that the shutter is open. With the function turned on,
the grainy noise typical of long exposures is reduced.
1. MENU
→
(Camera Settings)
→ [
Long Exposure NR]
→ desired setting.
Menu item details
On:
Activates noise reduction for the same duration that the shutter is open. When noise
reduction is in progress, a message appears and you cannot take another picture. Select this
to prioritize the image quality.
Off:
Does not activate noise reduction. Select this to prioritize the timing of shooting.
Note
[ Long Exposure NR] is not available when [ Shutter Type] is set to [Electronic
Shut.].
Noise reduction may not be activated even if [ Long Exposure NR] is set to [On] in the
following situations:
The shooting mode is set to [Sweep Panorama].