beautypg.com

P350 – Panasonic Lumix DMC-G7 body User Manual

Page 350

background image

12. Connecting to other equipment

350

Saving still pictures and motion pictures on a
Recorder

If you insert card holding content recorded with this unit into a

Panasonic recorder, you can dub the content to a Blu-ray Disc or

DVD etc.

Methods to export still pictures and motion pictures to other

devices will vary depending on the file format. (JPEG, RAW,

MPO, AVCHD, or MP4).

You cannot dub 4K burst files (MP4 format) with [Aspect Ratio] set to an
option other than [16:9] to hard disk drives, including those of Panasonic recorders. (As of May 2015)

See the operating instructions for the recorder about the details about copying and playing
back.

Dubbing with non-compatible equipment

You can dub the content played back using this unit to non-compatible equipment such as

recorders and video players by connecting this unit to the non-compatible equipment using

an AV cable (optional).

Non-compatible equipment will be able to play back the content. This is convenient if you

wish to pass around dubbed content. In this case, the content will be played back in

standard rather than high-definition picture quality.

1

Connect this unit with the recording equipment with an AV cable (optional).

2

Start the playback of this unit.

3

Start the recording on the recording equipment.

When ending the recording (copying), stop the playback on this unit after stopping the
recording on recording equipment.

When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV Aspect]

(P78)

on

this unit to [4:3] before starting a copy.

The image will be vertically long if you play back motion pictures copied with [16:9] setting on a

[4:3] aspect TV.

Always use a genuine Panasonic AV cable (DMW-AVC1: optional).

See the operating instructions for the recording equipment for details about copying and

playing back.

1Yellow: to the video input socket
2White: to the audio input socket

A Recording equipment

B AV cable (optional)
C Insert the AV cable so that its [

] mark

will face the [

] mark side of the camera.

D Check the terminal.