Panasonic Lumix DMC-G7 body - Manual (Page 167)

167
5. Focus and Brightness (Exposure) Settings
5
Press the shutter button halfway.
• The assist screen will close. The recording screen will be displayed.
• You can also close the assist screen by pressing [MENU/SET].
• If you have enlarged the picture by rotating the focus ring or moving the focus lever, the
assist screen will close approximately 10 seconds after the operation.
• MF Assist or MF guide may not display depending on the lens used, but you can display MF
Assist by direct operation of the camera, using the touch screen or a button.
• If you press a cursor button on the recording screen when [Direct Focus Area] in the [Custom]
menu is set to [ON], the screen that lets you set the area to be enlarged will be displayed.
• MF Assist is not displayed in the following cases:
– When recording motion pictures
– When recording with [ ] ([4K Pre-Burst]) of the 4K Photo function
– When using the Digital Zoom
Technique for Manual Focus
1 Rotate the focus ring to focus on the
subject.
2 Rotate it a little more.
3 Finely focus on the subject by rotating the
focus ring slowly in reverse.
• If you zoom in/out after focusing on a subject,
the focus may lose its accuracy. In that case,
re-adjust the focus.
• After canceling Sleep Mode, focus on the subject again.
• If you are taking close-up pictures:
– We recommend using a tripod and the self-timer (P201) .
– The effective focus range (depth of field) is significantly narrowed. Therefore, if the distance
between the camera and the subject is changed after focusing on the subject, it may become
difficult to focus on it again.
– The resolution of the periphery of the picture may decrease slightly. This is not a malfunction.