Panasonic Lumix DMC-G7 body - Manual (Page 220)

7. Functions Customized for Various Subjects and Purposes
220
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level
(brightness) to be processed as a zebra pattern.
• If there are any white saturated areas, we recommend compensating the exposure towards
negative
(P173) referring to the histogram (P53) and then taking the picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] (P70) in the [Custom] menu, each time you
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1]
> [Zebra 2] > [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1] > [OFF], allowing
you to switch the setting quickly.
Checking areas that may be white saturated ([Zebra Pattern])
> [Custom] > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[OFF] —
[SET]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
•
You can select a brightness value between [50%] and [105%]. In [Zebra 2],
you can select [OFF]. If you select [100%] or [105%], only the areas that
are already white saturated are displayed in a zebra pattern. The smaller
the value is, the wider the brightness range to be processed as a zebra
pattern will be.
MENU