Panasonic Lumix DMC-G7 body - Manual (Page 299)

299
11. Using the Wi-Fi function
∫ Changing the connection method
To change the connection method, follow the steps below:
(When the connection was made using [Wi-Fi] in the
[Setup] menu)
Press [DISP.]
(When the connection was made by pressing [Wi-Fi])
When connecting via a wireless access point ([Via Network]):
1
Select [Via Network].
•
Follow the connection procedure described on P329 to connect the camera to a wireless
access point.
2
Turn on the Wi-Fi function.
3
Connect the smartphone to the wireless access point to which the camera is
connected.
4
Start “Image App”. (P294)
When directly connecting the camera and smartphone ([Direct]):
1
Select [Direct].
•
Select [Wi-Fi Direct] or [WPS Connection] ¢ , and follow the connection procedure
described on P331 to connect the camera to the smartphone.
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device
and make security-related settings. To check whether your smartphone supports the
function, refer to the operating instructions of the smartphone.
2
Start “Image App”. (P294)
> [DISP.] button > [New Connection] >
[Remote Shooting & View] > [DISP.] button
On the camera
On your smartphone
On the camera
On your smartphone
Wi-Fi