Panasonic Lumix DMC-G7 body - Manual (Page 329)

329
11. Using the Wi-Fi function
You can select the method for connecting to a wireless
access point.
¢ WPS refers to a function that allows you to easily configure
the settings related to the connection and security of wireless
LAN devices.
To check if the wireless access point you are using is
compatible with WPS, refer to the manual of the wireless
access point.
Connecting via a wireless access point (via the network)
[WPS (Push-Button)]
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup
TM with a WPS mark.
Press the wireless access point
WPS button until it switches to WPS
mode.
•
Refer to the wireless access point
instruction manual for details.
e.g.:
[WPS (PIN code)]
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
1
On the camera screen, select the wireless access
point you are connecting to.
2
Enter the PIN code displayed on the camera screen
into the wireless access point.
3
Press [MENU/SET] of the camera.
•
Refer to the wireless access point instruction manual for
details.
[From List]
Select this option when you are not sure about the WPS
compatibility, or when you want to search for and connect to a
wireless access point.
• Refer to P330 for details.