Canon PowerShot SX410 IS - Manual (Page 97)

97
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Adding Images Individually
Still Images Movies
1
Choose [Select].
● Following the procedure in “Choosing
a Selection Method” (= 97), choose
[Select] and press the [ ] button.
2
Choose an image.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
● [ ] is displayed.
● To remove the image from the photobook,
press the [ ] button again. [ ] is no
longer displayed.
● Repeat this process to specify other
images.
● When finished, press the [ ] button
to return to the menu screen.
Printing Images Added to the Print List (DPOF)
Still Images Movies
● When images have been added to the
print list (= 95 – = 96), this screen
is displayed after you connect the camera
to a PictBridge-compatible printer. Press
the [ ][ ] buttons to choose [Print now],
and then simply press the [ ] button to
print the images in the print list.
● Any DPOF print job that you temporarily
stop will be resumed from the next image.
Adding Images to a Photobook
Still Images Movies
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software on your computer,
where they are stored in their own folder. This is convenient when
ordering printed photobooks online or printing photobooks with your own
printer.
Choosing a Selection Method
● Press the [ ] button, choose
[Photobook Set-up] on the [ ] tab, and
then choose how you will select images.
● [ ] may be displayed on the camera to warn you that the
memory card has print settings that were configured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.