Canon PowerShot SX410 IS User Manual
Page 70
70
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Selecting a Range
1
Choose [Select Range].
●
Following step 2 in “Choosing a Selection
Method” (= 69), choose [Select
Range] and press the [ ] button.
2
Choose images.
●
Follow steps 2 – 3 in “Selecting a Range”
3
Erase the images.
●
Press the [ ] button to choose [Erase],
and then press the [ ] button.
Specifying All Images at Once
1
Choose [Select All Images].
●
Following step 2 in “Choosing a Selection
Method” (= 69), choose [Select All
Images] and press the [ ] button.
2
Erase the images.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
2
Choose a selection method.
●
Press the [ ][ ] buttons to choose a
selection method, and then press the [ ]
button.
●
To return to the menu screen, press the
[
] button.
Choosing Images Individually
1
Choose [Select].
●
Following step 2 in “Choosing a Selection
Method” (= 69), choose [Select] and
press the [ ] button.
2
Choose an image.
●
Once you choose an image following
step 2 in “Choosing Images Individually”
(= 67), [ ] is displayed.
●
To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
●
Repeat this process to specify other
images.
3
Erase the image.
●
Press the [
] button. A confirmation
message is displayed.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.